Water pump fuse bmw e60 replacement In this article, I'll go over the steps involved with replacing the belt-driven water pump on BMW E60 6-cylinder M54 engine models. That's the fuse carrier in the E-Box that has five fuses in it (F01 through F05 -- four 30A fuses and one 20A fuse). BMW E60 water pump replacement | 2006-2010 5 series | N52 6 cyl. Electric water pump is most likely failing the drive moderately and over heat message point to the water pump, replace the thermostat also there bolted together. | Replace your own water pump, save money. . ). Fuses of the same amperage can be temporarily borrowed from another fuse location if a fuse goes out. Hopefully that fuse is your problem. If your vehicle is experiencing cooling issues, chances are the thermostat 11537549476 is To check a fuse, look at the silver-colored band inside the fuse. Step by step instructions. Once the water pump bolts and connection 4 are removed, the complete assembly can be pulled from the vehicle for whatever service is necessary (thermostat replacement and/or water pump replacement, U-shaped hose replacement, etc. That's the fuse carrier in the E-Box that has five fuses in it (F01 through F05 -- four 30A fuses and one 20A fuse). Complete information about the locations of the BMW E60 relay and fuse boxes with diagrams and decoding. There's probabaly a fault stored for water pump. Unplug the carrier and then slide off the top to get access to the fuses. Aluminum mounting bolts are one time use. Fuse box diagram (location and assignment of electrical fuses and relays) for BMW 5-Series (520i, 520d, 523i, 525i, 525d, 528i, 530i, 530d, 535i, 535d, 540i, 545i, 550i) (E60/E61; 2003-2010). Replace the fuse as soon as possible. In this article, I'll go over the steps involved with replacing the thermostat and water pump on BMW E60 models with the NG6 engine. Be sure to replace a bad fuse with a new one of the identical size and rating. Replace 11510392553 every time the water pump is removed. Be sure to work with a cool engine and confirm that the cooling system lacks pressure before opening the cooling system. If the band is broken or melted, replace the fuse. Be sure to work with a cool engine and confirm the cooling system lacks pressure before opening the cooling system. tgz lpsdp yicms zvk fhzo nakwf acfmx mrxe xdi lfypdv